VAPE DIRECT PIONEER STARTER KIT

Rating:
100% of 100

The Pioneer is designed to set the standard. Discover sumptuous new flavours with a rechargeable electronic cigarette, compatible with your favourite e-liquids. If you’re a new vaper this sleek and totally portable kit has everything you need to get started in minutes. Streamlined, easy to use and simple to maintain.

Whats Included

  • 1 x VA-Pioneer Rechargeable 650 mAh 4.2v Battery
  • 1 x VA-Clear DC Cartomizer
  • 1 x VA-Clear BDC Bottom Dual Coil 1.6 Ohms
  • 1 x USB Charging Cable
  • Reward Points You could earn rewardpoints by registering & purchasing this product

    Compatible Products

    The Pioneer is designed to set the standard. Discover sumptuous new flavours with a rechargeable electronic cigarette, compatible with your favourite e-liquids. If you’re a new vaper this sleek and totally portable kit has everything you need to get started in minutes. Streamlined, easy to use and simple to maintain.

    Contents

    • 1 x VA-Pioneer Rechargeable 650 mAh 4.2v Battery
    • 1 x VA-Clear DC Cartomizer
    • 1 x VA-Clear BDC Bottom Dual Coil 1.6 Ohms
    • 1 x USB Charging Cable

    Features

    VA-Pioneer Rechargeable 650 mAh 4.2v Battery

    • Quick Charge
    • Overcharge Protection
    • 4.2 Volts Output
    • 5 Click On/Off Power System

    VA-Clear DC Cartomizer

    • 1.6 Ohms Coil Resistance
    • Easy Fill/Refill Design
    • Anti Leakage Design
    • Easy to replace coils system
    • Ego thread connection to match all ego threaded batteries 

    Directions for use

    How to Refill the VA-Clear DC Cartomizer

    To fill or refill the VA-Clear DC Cartomizer you must have the cartomizer turned upside down with the mouthpiece at the bottom. Unscrew the base unit (coil head) and place down.

    Turn the Cartomizer at a 45 degree angle and proceed to pour your premium Vape Direct E-liquid into the chamber around the central hole until it reaches the fill/refill line. Be careful that you do not overfill past this line and that no E-liquid goes into the central chamber (airflow tube).

    TIP – try to pour the E-liquid slowly against the internal side of the cartomizer, that way you will make sure to avoid the central airflow chamber.

    You can now screw the base unit back onto the cartomizer – do this whilst still holding the cartomizer upside down.

    The cartomizer is now ready to screw onto your battery.

    TIP – Leave the VA-Clear DC Cartomizer to stand for approximately 5-10 minutes. This will ensure that the eliquid is fully saturated into the wicks and coil and lead to a full and flavoursome vaping experience. If the wick is not fully saturated it can burn out which causes a burnt taste. 

    Replacing the coil head

    You should replace your coil head on average every 2 weeks. Not doing so could cause the taste of your eliquid to deteriorate and the coil may become burnt out leaving a burnt taste.

    To replace the coil head make sure that the cartomizer is empty of all eliquid. Turn the cartomizer upside down so that the mouthpiece is facing downwards and unscrew the base unit.

    Unscrew the coil head from the base unit in a clockwise motion and screw in a brand new coil. You are now ready to re-fill the cartomizer following the steps outlined above.

    Remember – once you have filled your cartomizer containing the new coil you should leave it to stand for approximately 5-10 minutes before vaping. This will ensure that the wicks are fully saturated, not doing so could lead to the new coil burning out and leave a burnt taste. 

    Safety Information

    • Charge before first use
    • Do not over fill the cartromizer
    • The rechargeable battery can only be charged using the enclosed USB charger.
    • Do not charge for more than 4 hours and never charge overnight.
    • Do not leave battery unattended when charging

    Warranty Information

    For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products. 

    More Information
    Manufacturer Vape Direct
    Battery Capacity 650 mAh
    Wattage Output N/A
    Temp Range (c) N/A
    Temp Range (f) N/A
    Finish / Material Matte Rubber Finish, Stainless Steel (Silver Only), UV Gloss (Black Only)
    Capacity (ml) 1.6ML
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account

    Stock Availability

    Colour Status